Motion Pro, Pivot suspension vise tool

This is a front fork & rear shock absorber maintenance tool. It is used to securely hold the front fork slider for maintenance like oil & seal change. It also will hold the rear shock absorber, on body, shaft or shock reservoir, for maintenance work like spring, piston rod, seal head removal etc. - Designed to make suspension service simple and quick. - Holds shocks and forks securely while you change oil, re-valve, or change seals. - Pivoting head holds parts in any position, with mechanical stops every 45 degrees. - Aluminum Soft Jaw Vise holds cylindrically shaped parts utilizing a 4 point grip system. - Large side holds 40 mm to 61 mm diameter parts. - Small side holds 16 mm to 34 mm diameter parts. - Steel Frame is rigid yet has a small footprint, with 4 pre-drilled holes in the base for secure mounting to a workbench. - Movable fluid catch pan with mesh insert, and threaded drain bung. - HOW IT WORKS ON FORKS - - Soft Jaw Fork Peg holds fork slider up for removal of dust seal and seal retaining clip. - Repositionable bottom slide bar holds forks compressed while bleeding air (priming cartridge) during reassembly and is an excellent platform for adding, adjusting and taking fork oil level measurements. - Can be used to assist in removing compression valve assembly (use of stock front axle required). - HOW IT WORKS ON REAR SHOCK ABSORBERS - - Holds shock firmly around shock body, shaft or shock reservoir. - Facilitates removal of piston rod and seal head. - Facilitates removal of shock reservoir caps, chamber pistons or bladder. - Holds shock to remove spherical bearings or needle bearings. - Holds shocks for removal of shock spring.

Fits: > Universal