Part no. Packaging Description Retail price (excl. VAT)
507320 1 Andrews, 4th gear countershaft OEM replacement reference 35625-79B. Note: Non High-Contact gear. Will not fit OEM 95-06 unless corresponding gear is also replaced. See Tech-tip 72 in catalog. 73,77 EUR
519321 1 Jims 6-speed overdrive transm for 4-sp Plain alu housing with chrome billet trapdoor, transmission side and topcover. note: modifications and additional parts required. see catalog. 4.190,60 EUR
519377 1 JIMS, FAT-5 TRANSMISSION, SILVER The JIMS Fat-5 Overdrive are 5-speed transmissions with wider gears to handle the extreme peak loads on the transmissions with todays high power engines and big tires with a lot of traction. These peak loads rise far above the loads for what standard gears were designed to endure. The JIMS Fat Gear transmission are equipped with gears that are 18% up to 53% wider, depending on the load each gear set must carry. Gear ratio's are: 1st 2.94:1, 2nd 1.93:1, 3rd, 1.31:1, 4th 1.00:1, 5th 0.886:1 overdrive (stock is 1:1). Note: Custom application. Because of the width of the gears this transmission is +.560" (13mm) wider than stock at the transmission cover. This may interfere with exhaust and/or oil filler spout. Necessary modifications must be made. 4.309,87 EUR
507712 1 GW, transmission side cover screw kit. Chrome Allen head Used to install the transmission side cover to the transmission housing. 43,94 EUR
519378 1 JIMS, FAT-5 TRANSMISSION, BLACK The JIMS Fat-5 Overdrive are 5-speed transmissions with wider gears to handle the extreme peak loads on the transmissions with todays high power engines and big tires with a lot of traction. These peak loads rise far above the loads for what standard gears were designed to endure. The JIMS Fat Gear transmission are equipped with gears that are 18% up to 53% wider, depending on the load each gear set must carry. Gear ratio's are: 1st 2.94:1, 2nd 1.93:1, 3rd, 1.31:1, 4th 1.00:1, 5th 0.886:1 overdrive (stock is 1:1). Note: Custom application. Because of the width of the gears this transmission is +.560" (13mm) wider than stock at the transmission cover. This may interfere with exhaust and/or oil filler spout. Necessary modifications must be made. 4.070,41 EUR
527207 1 GW, transmission side cover screw kit. Stainless Allen head Used to install the transmission side cover to the transmission housing. 12,67 EUR
526299 5 James, gasket transmission end cover. Foamet Foamet (Foam Covered Metal). Used 5-speed Twin Cam models that have been converted to a 6-sp Screamin' Eagle transmission. OEM replacement reference 35148-03. James' Foamet gasket material has an aluminum core with a nitrile synthetic rubber foam layer bonded to both sides. 35,67 EUR
Clear

E-mail hotlist

Enter the email-address from the person you would like to share your hotlist with

Share hotlist