Motorcycle Storehouse
Dealer lounge
?
Username
Password
Login
I agree and have read the terms and conditions stated in
this document
.
» Dealer application
» Forgot your password?
Skip navigation
Home
Products
Brands
News
My Hotlist
Find Dealer
Contact
Catalogs
Exact match
Part no.
Packaging
Description
Retail price (excl. VAT)
997841
pr
*2 WEEKS EXTRA TRANSIT TIME* Miller, Omaha Euro 5 Slip-On mufflers. Matte Black A stainless steel slip-on system for the Indian Chief Dark Horse / Chief Bobber Dark Horse. This exhaust system is EURO 5 homologated and therefore approved for the Indian Cruiser models from 2021. This exhaust system is also suitable for use with saddlebags. Compared to the stock exhaust system, you can expect a short, slim design and a deeper, chopper sound. The original exhaust manifolds remain in place. Simply replace the stock silencers with the Miller Omaha Slip-On silencers and ride off legally. An EG/BE service card and the necessary installation material are included. Tapered matte black end cap. With removable dB absorber.
1.252,33 EUR
997501
1
DMP, License plate frame 3.0 Gloss Black France With built-in 3-1 taillight, brake light & turn signal function installed on left and right side of the frame & a top side mounted E approved LED license plate light. Tidy tail made simple! – The license plate frame is mounted to your existing bracket, or one of the DMP license plate brackets/holders for the cleanest look. Then you slide your license plate in from the bottom. The plate locks with the small screws from the back (included). Danish Motorcycle Parts (DMP) milled this frame from a single piece of billet aluminum for strength and lightweight, it's powder coated for durable and lasting beauty. Universal fit and will install to most motorcycles. - With E marked LED license plate light - With 3-1 turn signal, taillight & brake light combo.
357,72 EUR
700908
1
Bare Knuckle Performance, seat screw. 1/4-20. Gold This is, like most similar seat screws, hand installed. The additional hole in the screw allows you to stick a pin or screw driver in and give it just a little extra over a 'finger tight' installation, to help prevent losing it. Comes complete with rubber O-ring to help with a mar-free installation.
30,45 EUR
701752
Kit
Fox Factory, QS3-QSR remote reservoir shocks. Heavy Duty With Heavy Duty springs. Offers 3-position compression (QS3 switch) and rebound damping (QSR switch). Comes with remote reservoirs which increase fluid capacity and improve cooling by mounting custom brackets above the saddlebags where they get better airflow. This mounting position gives easy access to the QS3 (Quick Switch compression) three-position adjuster on the remote reservoirs comfort, extra support and maximum support. On the bottom of the shock you'll find the QSR switch (Quick Switch Rebound), which also allows comfort, extra support and maximum support. - QSR 1 Soft rebound: for comfort on bumpy backroads - QSR 2 Medium rebound: For 'any road', a balance of control and comfort - QSR 3 Hard rebound: For a 'glued to the asphalt' feeling on smooth twisty roads - QS3 (compression damping) switch 3-position for 'comfort', 'extra support', 'maximum support - Linear spring rate - Adjustable preload with setting guide marks - Top mount eyelet - Bottom mount eyelet - 3.31" travel - 14.06" extended length - 10.75" compressed length - Gas-charged mono-tube with internal floating piston (IFP) - 1.5-inch diameter 6061-T6 aluminum type III hard-anodized body - Fully rebuildable and re-valvable - Advanced high-flow, deflective disc velocity-sensitive damping - 5/8-inch diameter, low friction, super-finished hard chrome shaft - Matte black spring and black anodized preload ring - Includes mounting hardware, 2 mounting brackets for 2014-up H-D Touring models, spring preload spanner wrench, instructions and user manual - Heavy Duty spring rate, for bikes loaded most of the time over 240lb (109kg). Note: Standard Duty or Heavy Duty springs? This has nothing to do with quality but everything with what weight the bike will carry. For a bike usually loaded below 240Lbs./109kg (rider + luggage) the standard springs are the best choice. When the bike is usually loaded over 240Lbs/109kg (like rider + passenger + luggage), the Heavy Duty springs are the better choice.
1.673,69 EUR
700845
1
Cayo, phone.dokk. iPhone 14 Pro Max. Smoky black The elegant and flat case protects your valuable smartphone from scratches and drops. MagSafe compatible with extra strong magnets for attaching to magnetic holders and charging pods. Integrated recess for secure and quick locking with our holding systems.
23,63 EUR
986413
pr
*2 WEEKS EXTRA TRANSIT TIME* Bitubo, WMB dual shock absorber set. Chrome. 321mm, 321mm eye to eye length. Manual adjustable preload. No adjustable rebound damping. Quality single chamber shock absorber with floating piston oil/gas separator to help prevent foaming of oil. - High resistance alloy steel shock absorber body - 12mm diameter steel damper rod - Gas pressurized (Nitrogen) - Floating piston oil/gas separator - CNC machined billet aluminum alloy heads - Spring preload (stepless) - Fully serviceable - Includes 2 shock absorbers, assembly instructions, manual and spring preload adjustment tool.
412,89 EUR
Clear
E-mail hotlist
Enter the email-address from the person you would like to share your hotlist with
Recipient e-mail
Your name
Your email
Share hotlist