AMERICANAMBITION // AMERICAN PERFORMANCE COMPONENTS
• Kraus kits offer multiple sizes and model fitments to meet the needs of every rider. • Increase rigidity and rider input while reducing vibration with Kraus ISO Riser technology. • Enhance your H-D’s styling and performance with light weight machined billet components. • 100% Manufactured in the USA. ADJUSTABLE HEIGHT ISOLATED VIBRATION DAMPENING STRAIGHT OR KICKBACK 5.5˝ 7.5˝ 9.5˝ AVAILABLE AT: MOTORCYCLESTOREHOUSE.COM PRO KITS
AMERICANAMBITION WOLF ONE 10" PRO KIT Achieve a total pullback of 1.5" (38mm) in the risers, for a more comfortable riding position and increased control. The wider crosssection top fork clamp offers a positive hold of your forks, ensuring that your triple tree setup can handle hard use. • Increased axial strength over stock Harley Tree • Wide body fork clamps for positive hold of forks • Total pullback of 1.5" in the risers • Ultimate upgrade for your Road Glide bagger • More comfortable riding position with increased control • Able to handle hard use • Flexability through customization • Hand position height from the top of the stock triple tree with 10" (25.4cm) risers with Fly Bars = 12.5" (31.8cm) total Note: FM Fly Moto Style Bars are not compatible with wing-style perch clamps with location pin. (Noncompatible OEM part numbers: #41700321, #36700113) Note: Be sure to include 984611 ProLine Perch Half Clamps if you plan to run stock 2014 & up switch housings with the FM Fly Moto Bars. Note: Include 984612 RG Speedometer Instrument Extension Harness to extend your Gauge wiring to 20" (51cm) so you can place your RG Billet Gauge Bezel right where you want it. 15-23 FLTR Road Glides 984728 Wolf One 10" Pro Kit Kit includes: • Billet Top Clamp with Steering Lock, Black anodized • RG Billet Gauge Bezel T-Bar Riser Clamp. Takes stock Road Glide and Dakota Digital Gauges. Black anodized aluminum • 10" (25.4cm) Kickback Isolated Risers. Black anodized aluminum • 1-1/8" (28.6mm) FM Fly Moto Style Black Bars. Optional parts 984612 RG Speedometer Instrument Extension Harness 984611 Pro-line Perch Half Clamps 984611 984612 984728
AVAILABLE AT: MOTORCYCLESTOREHOUSE.COM ROAD GLIDE 10" PRO KIT If you want to keep the stock plastic gauge cover (nacelle) this offers everything you need in one easy package to run the Kraus Isolated Riser with Moto bars on your Road Glide. This setup bolts directly to your stock triple tree and relocates your risers so they will clear your gauge pod (some modification of the Nacelle is needed). The raptor plate and Kickback risers together offer a total of 3" (7.6cm) of pullback which creates a very comfortable riding position. A great handling bike starts with ergonomics and body position. No matter how fast your bike is and how well it brakes, you don't have real performance if you don't have comfortable control over your machine. 15-23 FLTR Road Glides 984729 Road Glide 10" Pro Kit Kit includes: • 10" (25.4cm) Straight Isolated Risers • Black anodized aluminum • Raptor 1-1/2" (3.8cm) Pull Back Plate - Black anodized aluminum • 1-1/8" (28.6mm) FM Fly Moto Style Handlebar with 1-1/8" riser area - Black steel • Pro-line Perch Half Clamps - Black anodized aluminum Optional parts 984604 RG billet gauge bezel. Black anodized 984612 RG Speedometer / instrument extension harness Hand position height from the top of the stock triple tree with 10" risers with Fly Bars = 14.5" (36.8cm) total 984612 984729 984604
AVAILABLE AT: MOTORCYCLESTOREHOUSE.COM
AMERICANAMBITION STREET GLIDE 10" PRO KIT The Street Glide 10" Pro Kit offers everything you need in one easy package to run the Kraus Isolated Riser with Moto bars on your Street Glide. The Street Glide Pro Kit moves the bars back towards the rider to clear the navigation screen and stereo. This setup bolts directly to your stock triple tree. The T-Rex plate and Kraus Isolated Risers offer a total of 2.5" (6.4cm) of pullback and an additional 1" (25.4mm) in height which creates a very comfortable riding position. A great handling bike starts with ergonomics and body position. No matter how fast your bike is and how well it brakes, you don't have real performance if you don't have comfortable control over your machine. Hand position height from the top of the stock triple tree with 10" risers with Fly Bars = 13.5" (34.3cm) total Note: When running the T-Rex pullback plate you can not use your stock Key Switch / Steering Lock so you will need to relocate the switch. Check with your local shop or dealership for options. Some bikes can be reprogrammed to not need the key switch at all. 08-23 FLHX Street Glides 984759 Street Glide 10" Pro Kit Kit includes: • 10" Straight Isolated Risers . Black Anodized aluminum • T-Rex Pull Back Plate. Black Anodized • 1-1/8" (28.6mm) FM Fly Moto Style Handlebar. Black steel • Pro-line Perch Half Clamps. Black anodized aluminum 984759
AVAILABLE AT: MOTORCYCLESTOREHOUSE.COM This Bully billet aluminum ST triple tree kit for the Lowrider ST complements the attitude of your bike while getting you in a more upright riding position. Improved cross-sectional rigidity and enhanced clamping forces are essential functional foundations of a performance front end. This kit checks all the boxes. A great handling bike starts with ergonomics and body position. No matter how fast your bike is or how well it brakes, you don't have real performance if you don't have comfortable control over your machine. BULLY ST 8"/ 10" PRO KIT 22-23 Softail FXLRST Low Rider ST 117 984809 Bully ST 8" Pro Kit Hand position height from the top of the stock triple tree with 8" (20.3cm) black anodized Kickback Isolated risers with Fly Bars = 10.5" (26.7cm) total. Note: This kit will not require longer brake/ clutch lines and wire extension, unless you plan to install a pullback plate. See optional parts for a complete front brake line kit. 984808 Bully ST 10" Pro Kit Hand position height from the top of the stock triple tree with 10" risers with Fly Bars = 12.5" (31.8cm) total. Note: This kit will require longer brake/clutch lines and wire extension. Optional parts 984611 Pro-line Perch Half Clamps 984621 FXST Speedo & Instrument Harness. Used to extend your harness to 32" (81.3cm) long. Plug & Play Kit includes: • 1-1/8" (28.6mm) FM Fly Moto Style Handlebar. Black • Softail Digital Gauge Bezel with 1.25" (3.18mm) T-Bar Clamp & 3" (7.6cm) extension. Black anodized • Bully Billet top triple tree. Black anodized 984621 984611 984809 984808
AMERICANAMBITION
AVAILABLE AT: MOTORCYCLESTOREHOUSE.COM This SF-Digi black anodized billet aluminum ST triple tree kit for Softail with a digital gauge. The Lowrider ST complements the attitude of your bike while getting you in a more upright riding position. Additionally, this setup drastically reduces the amount of unwanted leverage being placed on your bike's bushings while providing a much more solid bar feel. A great handling bike starts with ergonomics and body position. No matter how fast your bike is or how well it brakes, you don't have real performance if you don't have comfortable control over your machine. • Bolts directly to the stock top triple tree Softail: 18-20 FXBB Street Bob 107, 21-23 FXBBS Street Bob 114, 22-23 Softail FXLRST Lowrider ST 117, 20-23 FXST Softail Standard 107 984828 SF-Digi 8" Pro Kit Hand position height from the top of the stock triple tree with 8" (20.3cm) black anodized Kickback Isolated risers with Fly Bars = 10.5" (26.7cm) total. Note: This kit will not require longer brake/ clutch lines and wire extension, unless you plan to install a pullback plate. See optional parts for a complete front brake line kit. 984829 SF-Digi 10" Pro Kit Hand position height from the top of the stock triple tree with 10" (25.4cm) black anodized Kickback Isolated risers with Fly Bars = 12.5" (31.8cm) total. Note: This kit will require longer brake/clutch lines and wire extension. Kit includes: • 1-1/8" (28.6mm) FM Fly Moto Style Handlebar. Black • Digital Gauge Bezel. With 1.25" (31.8mm) T-Bar clamp & 3" (76mm) extension. Black anodized • 1-1/8" (28.6mm) Kickback Isolated Riser Set Optional parts 984611 Pro-line Perch Half Clamps 984621 FXST Speedo & Instrument Harness. Used to extend your harness to 32" (81.3cm) long. Plug & Play 984621 984828 984829 984611 SF-DIGI 8"/ 10" PRO KIT
AMERICANAMBITION This S-One black anodized billet aluminum S triple tree kit for the Lowrider S complements the attitude of your bike while getting you in a more upright riding position. Additionally, this setup drastically reduces the amount of unwanted leverage being placed on your bike's bushings while providing a much more solid bar feel. A great handling bike starts with ergonomics and body position. No matter how fast your bike is or how well it brakes, you don't have real performance if you don't have comfortable control over your machine. • Bolts directly to the stock top triple tree 22-23 Softail FXLRS Low Rider S 114 984826 S-one 8" Pro Kit Hand position height from the top of the stock triple tree with 8" (20.3cm) black anodized Kickback Isolated risers with Fly Bars = 10.5" (26.7cm) total. Note: This kit will not require longer brake/clutch lines and wire extension, unless you plan to install a pullback plate. See optional parts for a complete front brake line kit. 984827 S-one 10" Pro Kit Hand position height from the top of the stock triple tree with 10" (25.4cm) black anodized Kickback Isolated risers with Fly Bars = 12.5" (31.8cm) total. Note: This kit will require longer brake/clutch lines and wire extension. Kit includes: • 1-1/8" (28.6mm) FM Fly Moto Style Handlebar. Black • Lowrider S Gauge Bucket. With 1.25" (31.8mm) T-Bar clamp & 3" (76mm) extension. Black anodized • 1-1/8" (28.6mm) Kickback Isolated Riser Set Optional parts 984611 Pro-line Perch Half Clamps 984621 F XST Speedo & Instrument Harness. Used to extend your harness to 32" (81.3cm) long. Plug & Play 984621 984826 984827 S-ONE 8"/ 10" PRO KIT 984611
ISOLATED RISERS These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of hard-mounted riser legs and relocated rubber isolators right away. Black anodized aluminum. Available in a Straight and Kickback (pullback) style with 25mm (1") or 28mm (1-1/4") diameter at the riser clamp area in 8" (200mm) or 10" (250mm) rise. • Far less vibration than rigid mounted risers and a much better bar feel. • Black anodized CNC machined billet aluminum • Bottom clamp has an opening to accommodate hidden wiring • 3.5" center to center for standard OEM H-D fitment • Bushing life is increased, maintenance lowered • Wiring slot in the center of the riser body allows for easy installation and clean wiring. Note: If you purchase the 984604 RG Billet Gauge Bezel or 984618 Softail Digital Gauge Bezel with your risers, then you will need to add the mount separately (either 984606 Kraus T-Bar Clamp or 984620 Isolated Top Gauge Mount and the 984605 3" Extension for maximum adjustability). Note: Kraus Isolated Straight & Kickback Risers are are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp. Note: The 5" version for the Kickback option (= Kickback risers without legs) is NOT compatible with the Kraus Raptor or T-Rex Pullback Plates on bagger applications. Note: The Kickback and Straight Isolated Risers are a modular construction. You can just swap out the risers legs should you decide to run a shorter / taller rise down the line. See the 'optional Isolated Riser legs' for lengths between 3.5" (89mm) and 9.5" (241mm) tall. STRAIGHT KICKBACK Clamping area 1" 1-1/8" 1" 1-1/8" 8" / 200mm rise 984584 984585 984586 984587 10" / 250mm rise 984588 984589 984600 984601 OPTIONAL RISER LEGS 89mm (3.5") 984613 140mm (5.5") 984614 191mm (7.5") 984615 241mm (9.5") 984616 984615 984586 984585 STRAIGHT KICKBACK ISOLATED RISER LEGS AVAILABLE AT: MOTORCYCLESTOREHOUSE.COM
AMERICANAMBITION PRO-LINE PERCH HALF CLAMPS 82-23 H-D mech. & e-throttle with 1.25" I.D. risers 984602 Black powder coated aluminum 984603 Gold anodized aluminum 1-1/8" FM SLY MOTO STYLE HANDLEBARS This bar features a 1-1/8" (28.6mm) riser clamping area and tapers down to 1" (25.4mm) so stock hand controls can be installed. Compatible with e-throttle (TBW/Throttle By Wire) and regular cable throttle. Slotted for internal wiring. • Dimensions: 32" (81cm) wide, 3" (7.6cm) pullback x 2.5" (6.4cm) rise. • Compatible with the wiring slot of 1-1/8" Kraus Isolated Risers. • Not compatible with heated grips. Note: FM Fly Moto Style Bars are not compatible with wing-style perch clamps with location pin. (Noncompatible with OEM #41700321, #36700113) Note: If you plan to run stock 2014-up switch housings with this Kraus bar you will need to change your master cylinder and clutch perch clamps to early model clamps (Harley OEM part number 45138-08A black / MCS 900594 chrome) Used if you plan to run stock 2014-up switch housings with the Kraus FM Fly Moto handlebars. Will also fit 08-13 Touring with early OEM handlebars. Designed and CNC machined billet aluminum to the high Kraus standards to replace the Harley stock half clamps. Keeps a clean look while securing the handlebar master cylinder and clutch control. Note: Small modifications may be needed. Universal for: 08-13 Touring with OEM bars, 14-23 Touring with stock switch housings and Kraus Fly Moto bars 984611 Black anodized aluminum 984602 984603 984611
14-23 FLTR Road Glide with Stock Gauges The Kraus RG Billet Gauge Bezel allows you to ditch your stock plastic gauge housing and clean up your Road Glide dash. Encases your stock Harley gauges and mounts in a variety of different ways. Whether you use the T-Bar Riser Clamp Mount are 3.5" on center to center and can be mounted in front or behind the risers / bars (984606 for the 1.25" clamps of Kraus Isolated Risers, use the 984620 Isolated Riser Top Gauge Mount or add the 984605 3" (76mm) extension for maximum adjustability. All options to mount your gauges exactly where you want them. • All Billet Design • Light and compact • Isolated Risers Top Mount ROAD GLIDE GAUGE BEZEL 984604 | BLACK 3" (76MM) BILLET GAUGE EXTENSION 984605 | BLACK ANODIZED ALUMINUM 84-23 HD Allows you to mount any Kraus gauge bezel in a variety of different ways. Whether you use our 984606 Universal T-Bar Clamp Mount or 984620 Isolated Riser Top Gauge Mount, you can place your gauges exactly where you can see them. Compatible with: 984604 RG Billet Gauge Bezel 984619 Lowrider S Gauge Bucket 984618 Softail Digital Gauge Mount 84-23 HD With this Kraus T-bar Clamp, you can mount your gauges in a variety of different ways on the Kraus Isolated Risers or Aftermarket T-Bars. Place your your gauges exactly where you want them! Offers 3" (7.6mm) extension and fits all 1-1/4" (3.2cm) diameter risers legs/T-bars with 3.5" (8.9cm) center to center width, as used on most H-D models. Compatible with: 984604 RG Billet Gauge Bezel 984619 Lowrider S Gauge Bucket 984618 Softail Digital Gauge Mount T-BAR 3" (76MM) EXTENSION CLAMP 984606 | BLACK ANODIZED ALUMINUM SINGLE PARTS AVAILABLE AT: MOTORCYCLESTOREHOUSE.COM
00-23 Touring The T-Rex handlebar pull back plate mounts to the top of the triple tree and moves your bar mounts towards the rider 2.5". The T-Rex plate adds 1" of height. When running the Kraus T-Rex pullback plate you CAN NOT use your stock Key Switch/ Steering Lock so you will need to relocate the switch or fully remove it with an optional CVO Ignition Flash done by your local HD dealer. Check with your local shop or dealership for options. WOLF ONE STEERING LOCK 984608 | CHROME PLATED STEEL 15-23 Touring Steering Lock for the 984607 Wolf One Top Clamp. This is a mechanical steering lock only, it does not work as an electrical ignition switch. • Comes with 2 keys • Fits 984607 Gen II Wolf One Top Clamps with switch mounting areas that have 4 small holes. RAPTOR 1-1/2" (38MM) PULLBACK PLATE 984609 | BLACK ANODIZED ALUMINUM 00-23 FLTR Road Glides, 00-22 FLHR Road Kings The Raptor Pull Back Plate is for Road Glides. Bolt it to your stock or aftermarket triple tree to relocate the bar mounts towards the rider 1.5" so that you can mount any standard risers and they will clear the Gauges on 2014 & Up Road Glides. T-REX 2.5" (63.5MM) PULLBACK PLATE 984610 | BLACK AMERICANAMBITION
15-23 FLTR Road Glides Your top tree clamp is an essential part of a performance front end setup. The Wolf One Top Clamp has been engineered and designed with a broader cross section offering increased axial strength over the stock Harley Tree. The increased surface area of our wide body fork clamps offer positive hold of your forks giving you peace of mind that your Triple Tree setup will absorb the abuse of hard use. • Intended for Road Glides and allows you to remove your stock plastic Nacelle to have a clean open look of an inverted front end • Works great with internal fork cartridge kits • Fits stock 49mm diameter fork tubes • Complete with a billet top nut cover • Bolt your risers directly to this Wolf One Top Clamp or optionally run one of our Pullback Plates. (984608 Kraus Steering Lock is not accessible with 984610 T-Rex Pullback Plate) 15-23 FLTR Road Glides and Road Glide CVO This RG Speedometer Instrument Extension Harness is used to extend your gauge wiring to 20" (51cm) so you can place your 984604 RG Billet Gauge Bezel right where you want it. • Allows for easy relocation of speedo/tach cluster when using tall risers • 20" (51cm) long OEM wire colors, terminals and connectors RG SPEEDOMETER & INSTRUMENT EXTENSIONS HARNESS 984612 WOLF ONE GEN II BILLET BAGGER TOP CLAMP 984607 | BLACK ANODIZED BILLET ALUMINUM AVAILABLE AT: MOTORCYCLESTOREHOUSE.COM
BULLY BILLET TOP CLAMP 984617 | BLACK ANODIZED ALUMINUM 20-22 Softail FXLRS Low Rider S 114, 22-23 Softail FXLRS Low Rider S 117, 22-23 Softail FXLRST Low Rider ST 117 The combination of performance, functionality and aggressive aesthetics makes the Bully top triple tree one of the primary upgrades for your Harley Low Rider S or ST. Enhance the styling of your Harley Softail with the anodized billet look that Kraus has become known for. Edgy tooling lines and smooth finishes unite with precision manufacturing to bring your bike into the new era of highclass aesthetic styling. Improved cross-sectional rigidity and enhanced clamping forces are essential functional foundations of a performance top tree. The Bully checks all the boxes. • Direct replacement for the stock top triple tree • No additional parts needed • Easy to install 22-23 Softail FXLRS Low Rider S 117 Allows you to relocate the stock gauge to a more visible and ergonomic position. Encases your stock Harley gauges and mounts in a variety of different ways. Whether you use the Kraus 984606 Universal T-Bar Clamp Mount or 984620 Isolated Riser Top Mount, you can place your gauge exactly where you want it. • All billet aluminum anodized construction • Light and compact LOW RIDER S GAUGE BUCKET 984619 | BLACK ANODIZED ALUMINUM Instrument is shown for reference only and is not included. AMERICANAMBITION
H-D with Kraus Isolated Risers Allows you to mount a Kraus Billet Gauge Bezel directly to the top of your Isolated Risers. Mounts directly to the top clamp of the Kraus Isolated Risers. This top plate bezel mount can be installed with the mount pointing 'up' or 'down' for a higher or lower gauge mount position. 18-23 Softail The T-Rex Pull Back Plate mounts to the top of the triple tree and moves your bar mounts towards the rider 2.5" (6.35cm) for a more comfortable ride. It solid mounts to the stock or aftermarket triple trees and the risers solid mount to the T-Rex Plate. Since the handlebars have no longer vibration insulating dampers Kraus recommends the use of their Isolated Risers with built-in vibration damping. • Moves bar towards rider 2.5" (6.35cm) • Adds 1" (25.4mm) of total height to the bar/riser • It is recommended running Kraus Isolated Risers with this setup for Vibration Damping • Black anodized CNC machined billet aluminum. T-REX 63.5MM PULLBACK PLATE 984638 | BLACK ANODIZED ALUMINUM ISOLATED RISER TOP GAUGE MOUNT 984620 | BLACK 18-23 FLSB Sport Glide 107, 18-23 Street Bob, 18-23 Breakout, 18-20 FXDRS 107, 20-23 FXST Softail Standard 107, 22-23 FXLRST Low Rider ST 117 Used to extend your instrument harness to 32" (81.3cm) long. Perfect to place your Gauge Bezel for the speedo/tach cluster without running out of wiring length. • Pre-installed connectors • Plug & Play for all models with handlebar mounted instruments. FXST SPEEDO & INSTRUMENT HARNESS 984621 AVAILABLE AT: MOTORCYCLESTOREHOUSE.COM
18-23 Softail The Raptor Pullback Plate bolts to your stock or aftermarket triple tree to relocate the bar mounts towards the rider 1.5" (3.8cm). It solid mounts to the stock or aftermarket triple trees and the risers solid mount to the Raptor Plate. Since the handlebars have no longer vibration insulating dampers Krause recommends the use of the Isolated Risers with built-in vibration damping. • Moves bar towards rider 1.5" (3.8cm) • Adds 2.5" of total height to the bar/riser • Improves bar position when using Motocross style bars • It is recommended running Kraus Isolated Risers with this setup for Vibration Damping • Black anodized CNC machined billet aluminum. 18-23 Softail with 70900651 (USA) and OEM 70900655 (HDI) digital gauge This is a light weight CNC machined billet aluminum housing for the M8 Softail digital gauge. The housing completely encloses your OEM digital gauge and creates a clean finished look. Whether you use the Kraus 984606 Universal T-Bar Clamp Mount or 984620 Isolated Riser Top Mount, you can place your gauge exactly where you want it. • Light weight billet aluminum construction • Adjustable pitch / angle • Multiple mounting options • Compatible with digital gauges OEM 70900651 (USA) and OEM 70900655 (HDI) RAPTOR 38MM PULLBACK PLATE 984637 | BLACK ANODIZED ALUMINUM SOFTAIL DIGITAL GAUGE BEZEL 984618 | BLACK
17-23 Touring • A lightweight and rigid design that is machined from solid billet aluminum with a black anodized finish. • These Kraus foot controls allows adjustability, enhanced control and quick shifting. • Offer 3 different ratio settings to get the perfect shift feel, the adjustable toe shift peg allows for a shorter reach for more precision. • The heal shift peg can be positioned radially for comfort. • The short brake arm and adjustable mini brake peg are lightweight and allow effective brake actions. • This kit has been engineered to give you a quicker responding, more precise performance riding experience. • Complete with all required hardware for a hassle-free installation. APEX SS3 BAGGER FOOT CONTROLS 985749 | BLACK ANODIZED BILLET ALUMINUM All H-D with traditional male mount (excl. rider/ passenger on: 18-23 Softails, 20-21 Livewire, excl. rider location on: 15-20 XG, 10-21 XL1200X/ XS, 11-20 XL1200C, 12-16 XL1200V) • Machined from solid billet aluminum with a black anodized finish. • Perfect to combine with the Max Lean rider floorboards with the Max Lean Mini floorboards for your passenger. • In fact these small floorboards can be used in all H-D applications that require the traditional male mount. • Additional applications include highway pegs, passenger pegs, or rider footpegs. MAX LEAN MINI FLOORBOARDS 985747 | BLACK ANODIZED ALUMINUM AVAILABLE AT: MOTORCYCLESTOREHOUSE.COM
06-23 Touring Floorboards that inspire confidence, and confidence is control. The Kraus Max Lean floorboards are engineered to sit closer to the rider’s center of gravity than stock floorboards. The aggressive design leaves the rider feeling completely planted at pace, while the kickback heel and tapered edge allow huge lean angles. Because no two riders are identical, width and pitch are fully adjustable, creating one of the finest custom floorboards available. • 1" (2.54cm) higher and 2" (5.1cm) back from stock position for a mid-control feel • Adjustable for pitch angle and width • Kicked back heel for a more aggressive stance • Tapered edge for greater lean angle • Aggressive grip surface • Lightweight, high strength CNC machined billet aluminum • Black anodized finish • Dimensions 4.75" (12cm) wide x 12" (30.5cm) long x 1.75" (4.4cm) thick • Replaces OEM 50683-04 and 50688-04. MAX LEAN FLOORBOARDS 984622 | BLACK ANODIZED ALUMINUM
ERG ONE FLOORBOARDS 984623 | BLACK ANODIZED ALUMINUM 00-23 Touring (excl. Softails) Designed for Aggressive Comfort. Adjustable 1" forward to rear so you can get your legs and feet in the correct position depending on your body and riding style. With the boards in their rear most position it gives the rider the feel of midcontrols but still retains the comfort of a full size board. Constructed from light weight billet aluminum and equipped with replaceable 'slippery' Delrin sliders on the outer most edge so you won't destroy your boards on the tarmac when you're digging deep in the corners. • Adjustable forward to rear by 1 inch • Lightweight, high strength CNC machined billet aluminum • Black anodized finish • Replaceable Delrin floorboard slider • Dimensions 4.75" (12cm) wide x 12" (30.5cm) long x 1.75" (4.4cm) thick • Sold in pairs • Replaceable Delrin sliders are available as 985740. All H-D with Traditional Male Mount (excl. rider/ passenger on: 18-23 Softails, 20-21 Livewire, excl. rider location on: 15-20 XG, 10-21 XL1200X/ XS, 11-20 XL1200C, 12-16 XL1200V) Designed for Aggressive Comfort, the light weight billet aluminum APEX Edge foot pegs will plant your feet on a solid platform for increased stability and control. The serrated finish increases traction that offers confidence deep in the corners for increased performance and styling. • Fits all with traditional H-D male mount • Fits baggers on passenger location • Lightweight, high strength CNC machined billet aluminum • Black anodized finish APEX EDGE FOOTPEGS 984631 | BLACK ANODIZED ALUMINUM AVAILABLE AT: MOTORCYCLESTOREHOUSE.COM
All H-D with Traditional Male Mount (excl. rider/ passenger on: 18-23 Softails, 20-21 Livewire, excl. rider location on: 15-20 XG, 10-21 XL1200X/XS, 11-20 XL1200C, 12-16 XL1200V) Mini floorboards are used to replace rider or passenger footpegs with the traditional H-D male mount. They offer offer more comfort through a larger foot platform. Designed for Aggressive Comfort. Adjustable 1" forward to rear so you can get your legs and feet in the correct position, perfect for long rides. • Larger foot platform, more comfort on long rides • Fits all with traditional H-D male mount • Fits baggers on passenger location • Adjustable forward to rear by 1 inch • Adjustable pitch angle • Lightweight, high strength CNC machined billet aluminum • Black anodized finish • Dimensions 3.5" (9cm) wide x 6" (15cm) long x 1" (2.5cm) thick ERG ONE MINI FLOORBOARDS 984630 | BLACK ANODIZED ALUMINUM
08-23 Touring (excl. Trikes) When you find something in life that moves you, you move with it and make it your life. This passion and the Kraus motto of blending form and function to mesh the worlds of beauty and ride-ability is seen through and through. Saddlemen® is pumped to be working with Kraus Motor Co. on this seat build. If you are looking for the ultimate performance upgrade, look no further. • For riders that prefer a narrow seat • Combines a Gel-Core interior and Ultra-Foam that creates a foam that is a perfect balance of rigidity and user compliance • Ultra-Foam unique molding process creates an elementresistant self skinning process that seals the foam from water and enhances the seat's durability as well as comfort • Co-molded Gel-Core is the largest comfort advancement in motorcycle seating since the creation of the suspension • Solar reflective Carbon Fiber Saddlehyde upholstry, leater-feel but stronger and more giving than genuine leather. UV rays resistant • Seat dimensions: 31x15x11" (79x38x28 cm) MOTO PRO SERIES SEAT 984632 | BLACK Most 96-23 H-D with 1-4"-20 thread (UNC) Direct replacement for your stock seat bolt. Designed to be substantial easier to remove, without tools. Ideal if you switch seats frequently (solo, 2-up etc.). Made from high-quality materials and is built to last. It will not loosen, come apart or wear out over time. • Quicker to remove the seat • Adds Kraus Mobium emblem styling • Black anodized aluminum knob • High quality • Fit all models with 1/4"-20 threaded seat bolt • Nylon washer keeps the knob in place and prevents rattling. PRO LINE QUICK MOUNT SEAT SCREW 984655 AVAILABLE AT: MOTORCYCLESTOREHOUSE.COM
09-23 Touring (excl. Trikes) This Kraus Vector One axle adjuster is designed to keep your rear wheel aligned. Stock parts are effectively made for limited torque producing engines only and rear axle and axle adjusters may slip under load. Wheel misalignment can create speed wobbles, ill-handling effects and more of which nothing is good. The Kraus axle adjuster uses a threaded locking mechanism that is easy to adjust, secure and perfectly keeps wheel alignment no matter how much torque you throw at it. • Must have for Power Baggers • High grade nickel plated 1144 Stress proof alloy steel axle is nearly 2 times stronger than a stainless axle • Adjuster housings and slides are billet aluminum • Axle nuts are stainless and are secured by a c-clip • Easy alignment: The clocking tick marks and the locking screw mechanism makes it easy and secure VECTOR ONE AXLE & ADJUSTER 984633 | BLACK AMERICANAMBITION
00-23 H-D Front with Stock Forks Upgrade to 108mm radial brake calipers with this easy to install mount brackets. The increased fluid capacity of aftermarket radial brake calipers improves lever feel and overall braking performance. Compatible with: Aftermarket 108mm radial brake calipers on 2000 and up stock Harley forks. Note: The 108mm is ambidextrous. Run them on the left or right side. If you have dual disks, order a set of two. Note: This conversion will require longer brake lines. Note: Use with 11.5", 11.8" or oversize 320mm rotors by adding spacers between mount and radial caliper. Note: See 985741 for an optional Kraus radial caliper hardware kit (M10-1.25) 00-23 Touring (rear) Used to upgrade from the stock caliper to a single 108mm radial caliper on the rear of your Touring bike. Looks great and will compliment any bike's style. Allows fitment of 108mm style aftermarket radial calipers and will allow up to a 300mm rotor size. • For standard 25mm axle diameter • For most 108mm radial aftermarket calipers • Up to 300mm brake rotor • Black anodized CNC machined billet aluminum. Note: Caliper spacers may be required to space off your caliper to the appropriate height, depending on your rotor size. REAR RADIAL CALIPER MOUNT 984635 | BLACK FRONT RADIAL CALIPER MOUNT BRACKET 984634 | BLACK AVAILABLE AT: MOTORCYCLESTOREHOUSE.COM
For Stock Brake Lines: FLHR 10-13, FLHRC 08-13, FLHRXS 17-19, FLHTC 08-13, FLHTCU 08-13, FLHTI 08-13, FLHTK 10-13, FLHX 08-13, FLHXI 08-13, FLTR 08-09, FLTRU 11-13, FLTRX 10-13, FLTRXS 2018. The Kraus 320mm Axial Caliper Mounts reposition your brake calipers to a larger radius and allow the use of the high performance Galfer 320mm Wave rotors. • Complete with installation hardware. Note: For the given models that are not compatible with stock brake lines, longer 21" brake lines must be purchased separately. Note: Visit motorcyclestorehouse.com to see fitments for Longer 21" Brakes Lines 985742 Left Front 985743 Right Front 320MM AXIAL CALIPER MOUNT, FRONT BLACK ANODIZED BILLET ALUMINUM 984636 LEFT & RIGHT FRONT SET 20-23 Softail Lowrider S/ST, 18-23 Softail (excl. 20-23 Lowrider S/ST) Used to upgrade from the stock caliper to a single 108mm radial caliper on the rear of your M8 Softail. Works in combination with the stock 25mm rear axle and brake rotor sizes upto 320mm. • For installing 108mm radial caliper bolt spacing • No modifications required • Fits with stock 25mm diameter rear axle • Allows upto 320mm brake rotor diameter • Radial caliper hardware kit is optional available 985741 (60mm), 985745 (70mm), 985746 (80mm). Note: The 2020-up Softail Lowrider S/ST fitment has a different mounting position/offset from other M8 Softails. 985741 60mm Kit 985745 70mm Kit 985746 80mm Kit REAR RADIAL CALIPER MOUNT BRACKET 984640 | BLACK ANODIZED ALUMINUM 985744 | BLACK ANODIZED ALUMINUM AMERICANAMBITION
07-23 Baggers / Touring Show off those top of the line shocks. Resi Mounts allow you to mount your Öhlins remote reservoirs on the rear fender strut cover for easy access to the compression damping knob and aggressive looks. To mount the reservoirs to the front saddlebag guard rail mount, add the brackets separately. For 2020-up models use 2 spacers per side pre-2019 models use 1 spacer per side. REMOTE RESERVOIR MOUNTS 984644 | BLACK ANODIZED BILLET ALUMINUM 07-23 Baggers / Touring Show off those top of the line shocks. These Resi Brackets allow you to mount your Öhlins remote reservoirs to the front saddlebag guard rail mount. For 2020-up models use 2 spacers per side pre-2019 models use 1 spacer per side. REMOTE RESERVOIR SADDLEBAG BRACKETS 984645 | BLACK AVAILABLE AT: MOTORCYCLESTOREHOUSE.COM
H-D with Radial Mounted Caliper with M10-1.25 Thread Used to properly space and mount radial brake calipers to Kraus caliper mounts. The 12-point high grade black anodized G5 Titanium flanged bolt allows for increased torque, holding power and corrosion resistance while decreasing weight and offering premium performance. 2.5mm aluminum spacers stack to form all commonly needed spacing. For use with aftermarket radial calipers. Note: Each kit will mount one caliper. Note: Designed to run with Kraus caliper mounts. If you're not running Kraus radial caliper adapters, make sure the thread pitch of your mounts are M10-1.25. Note: When using any OEM calipers it is recommended setting the caliper in place and measuring for proper spacing. OPTIONAL RADIAL CALIPER HARDWARE KITS 985741 | 60MM 985745 | 70MM 985746 | 80MM
06-23 Touring, Trike, 2015 FLHTCUL, FLHTK, 07-15 Touring, Trikes with narrow profile primary cover • Direct replacement for the stock derby cover. • Constructed from light weight billet aluminum and equipped with replaceable 'slippery' Delrin slider on the outer most edge so you won't destroy your derby cover on the tarmac when you're digging deep in the corners. • Includes stainless installation hardware. • Used with the 'narrow profile' outer primary covers as stock on all 16-up Touring and Trikes. Also fits 07-15 Touring, Trikes that are custom equipped with the OEM 25700385 or 25700438 'narrow profile' outer primary cover. Note: These derby covers are a bit larger in diameter than the regular derby cover of earlier models and will therefore not fit regular outer primary covers of 07-15 models Note: Replacement Delrin slider MCS 985773 PRO LINE SLIDER DERBY COVER 984653 | BLACK ANODIZED BILLET ALUMINUM PRO LINE SLIDER DERBY COVER 984654 | BLACK ANODIZED BILLET ALUMINUM 2018 FLSB Sport Glide, 19-23 Softail Constructed from light weight billet aluminum and equipped with replaceable 'slippery' Delrin slider on the outer most edge so you won't destroy your derby cover on the tarmac when you're digging deep in the corners. Includes stainless installation hardware. Direct replacement for the stock derby cover. Used with the 'narrow profile' outer primary covers as stock on all 19-up Softail and 2018 FLSB models. Fits other 2018 Softail models that are custom equipped with OEM 25701077, 25700913, 25700937, 25700941, 25701039, 25701040 or 25701043 'narrow profile' outer primary covers. • Includes stainless steel screws. Note: Replacement Delrin slider MCS 985774
Kraus KRT Forks (FF52X), Kraus Dynamoto Forks (FGRT 205s), Öhlins FKS 212, FKS 221, FKS 228, and FKS 508 Model Forks and some others Used to help in installation of specific Öhlins cartridges and forks. Designed and engineered to be used with Kraus KRT forks (FF52X), Kraus Dynamoto forks (FGRT 205s), Öhlins FKS 212, FKS 221, FKS 228, and FKS 508 model forks. Tool comes with M8x1.25, M10x1.25, and M12x1.25 thread sizes allowing it to be used in other applications as well. KRT Forks (FF52X), Dynamoto Forks (FGRT 205s), and Öhlins FKS 508s Required for Öhlins fork rebuilding and cartridge installation of Öhlins FKS 508 cartridges. • This tool uses a 3/8" drive end and provides easier assembly and disassembly when servicing specific Öhlins forks. • Designed and engineered to be used with the KRT Forks (FF52X), Dynamoto Forks (FGRT 205s), and FKS 508s Öhlins NIX 22/30 Fork Cartridge Kits Used to help you in the installation of Öhlins fork cartridges. This 'multi tool' wrench includes the tools seldomly found in a toolbox but are necessary to install Ohlins cartridges without hassle. Includes: • 50mm. 8 sided closed end used for installing caps • 41mm. 6 sided closed end used for installing caps • 13mm. can hold bottom nut on drop in cartridges • 14mm. Can set preload on cartridges • 19mm. Can hold nut inside cartridge when tightening Compatible with the following cartridges: • FKS 212 NIX 22 Cartridge Kit • FKS 221 NIX 22 Cartridge Kit • FKS 228 NIX 22 Cartridge Kit • FKS 508 NIX 30 Cartridge Kit. CARTRIDGE PULL ROD TOOL 984641 CARTRIDGE SEAL HEAD DRIVER TOOL 984642 ÖHLINS CARTRIDGE WRENCH 984643 AMERICANAMBITION
Motorcycle Storehouse B.V. Gotenburgweg 46, 9723 TM Groningen, The Netherlands +31 (0)50 3039 775 • sales@mcseurope.nl Motorcycle Storehouse B.V. The Netherlands does not sell retail. You can purchase our catalog and products through your local dealer. For pricing and availability check our website. MOTORCYCLESTOREHOUSE.COM
www.motorcyclestorehouse.comRkJQdWJsaXNoZXIy NTExMDU=